
Aquael Hypermax Replacement Filter Sponges are designed to maintain effective mechanical and biological filtration in compatible Aquael Hypermax external canister filters. Available in three options, including the 20 PPI Standard Sponge, 30 PPI Blue Sponge and Mechanical Pre-Filter Sponge, these replacement filter media help remove aquarium waste, maintain water circulation and support efficient filtration.
Each sponge performs a different filtration function, allowing you to select the replacement media required for your aquarium filter. The 20 PPI Standard Sponge captures larger debris, the 30 PPI Blue Sponge removes finer suspended particles, and the Mechanical Pre-Filter Sponge traps coarse waste before it reaches the main filtration stages.
Manufactured from aquarium-safe filtration foam, these replacement sponges are designed to fit their designated positions within compatible Aquael Hypermax filtration systems. They are straightforward to install and can be cleaned during routine filter maintenance.
Available Options:
Option 1: Aquael Hypermax Standard Filter Sponge 20 PPI
The Aquael Standard Hypermax 20 PPI Sponge is a genuine replacement filter media insert designed for Aquael Hypermax external canister filters. Its coarse, open-pore structure captures larger suspended particles, including uneaten fish food, plant fragments and organic debris.
With a pore density of 20 PPI (pores per inch), the sponge provides effective mechanical filtration while maintaining good water circulation. By trapping larger waste particles, it also helps reduce the amount of debris reaching other biological and chemical filter media.
The porous foam provides a surface for beneficial nitrifying bacteria to colonise, supporting biological filtration and the aquarium nitrogen cycle.
Option 2: Aquael Hypermax Blue Filter Sponge 30 PPI
The Aquael Hypermax Blue 30 PPI Sponge is a replacement filter foam cartridge designed for the Aquael Hypermax 4500 external canister filter. Its finer pore structure helps capture smaller suspended particles and organic debris, contributing to clearer aquarium water.
Featuring a pore density of 30 PPI, the blue sponge provides mechanical filtration while allowing water to circulate through the filter media. Its porous structure also supports the colonisation of beneficial nitrifying bacteria involved in biological filtration.
This replacement foam fits into the designated Hypermax 4500 filter basket without cutting or modification.
Option 3: Aquael Hypermax & Hypermax Link Mechanical Pre-Filter Sponge
The Aquael Hypermax Pre-Filter Sponge is a genuine replacement mechanical filtration sponge designed for Aquael Hypermax and Hypermax Link external filters. Unlike the 20 PPI and 30 PPI filter basket sponges, this replacement fits into the designated pre-filter chamber.
As aquarium water enters the filter, the pre-filter sponge captures coarse particles and debris before they reach the main filtration stages. This helps prevent larger waste particles from accumulating within the biological filter media and supports efficient water circulation.
The sponge can be removed and rinsed in aquarium water when the filter flow rate decreases. Its straightforward installation and maintenance make it a practical replacement part for routine external filter servicing.
Key Features:
- Three replacement sponge options: Choose from 20 PPI Standard, 30 PPI Blue or Mechanical Pre-Filter Sponge.
- Designed for Aquael Hypermax filters: Replacement filtration media for compatible Hypermax external canister filters.
- 20 PPI coarse filtration: Captures larger debris, including uneaten food, plant fragments and suspended organic particles.
- 30 PPI finer filtration: Helps remove smaller suspended particles and impurities from aquarium water.
- Mechanical pre-filtration: The pre-filter sponge captures coarse debris before water reaches the main filter media.
- Supports biological filtration: The 20 PPI and 30 PPI sponges provide surfaces for beneficial nitrifying bacteria to colonise.
- Protects other filter media: Helps reduce the accumulation of larger waste particles within subsequent filtration stages.
- Maintains water circulation: Porous filtration foam allows water to pass through while retaining debris.
- Aquarium-safe materials: Manufactured from filtration foam suitable for use in aquarium water.
- Easy installation: Each replacement sponge is designed to fit its designated filter basket or pre-filter chamber.
- Reusable filtration media: Sponges can be gently rinsed in aquarium water during routine maintenance.
- Simple replacement: Replace the sponge when it becomes significantly worn, damaged or deteriorated.
- Single sponge per selection: Each variation contains one replacement sponge.
Which Sponge Should You Choose?
- 20 PPI Standard Sponge: Suitable for coarse mechanical filtration. Its larger pores capture bigger waste particles while maintaining good water flow. Also supports biological filtration.
- 30 PPI Blue Sponge: Suitable for finer mechanical filtration. Its smaller pores capture finer suspended debris while supporting beneficial bacterial colonisation.
- Mechanical Pre-Filter Sponge: Suitable for capturing coarse waste as water enters the external filter. Designed for the pre-filter chamber of Aquael Hypermax and Hypermax Link filters.
Important: These are three separate product variations, not a three-piece set. You will receive one replacement sponge in the option selected when ordering.
Directions for Use:
- Switch off the filter: Disconnect your Aquael Hypermax external filter from the electricity supply before carrying out maintenance.
- Access the appropriate compartment: Open the filter according to the manufacturer's instructions. The 20 PPI and 30 PPI sponges fit into their designated filter baskets, while the mechanical pre-filter sponge fits into the pre-filter chamber.
- Remove the existing sponge: Carefully take out the used filter foam.
- Install the replacement: Position the selected replacement sponge correctly inside its designated compartment.
- Reassemble the filter: Securely close the filter and restart the system following the manufacturer's instructions.
- Clean when required: Gently rinse the sponge using water removed from the aquarium. For the pre-filter sponge, clean it when reduced water flow indicates accumulated debris.
- Replace when worn: Fit a new sponge when the existing foam shows significant signs of damage or deterioration.
Maintenance Advice:
Regular inspection and cleaning help maintain effective filtration and water circulation. The frequency of maintenance will depend on aquarium stocking levels, feeding habits and the amount of debris collected by the filter.
When cleaning the 20 PPI or 30 PPI sponge, gently rinse it in aquarium water to remove accumulated debris while helping preserve beneficial bacterial colonies. Avoid excessive washing or replacing all established biological filtration media at the same time.
For the mechanical pre-filter sponge, remove and rinse it in aquarium water at the same temperature as the tank when the flow rate decreases. Replace the sponge when it shows significant signs of wear.
Do not use soap, household detergents or cleaning chemicals on any of the filter sponges.
Important Information:
- Check your filter model and required sponge type before purchasing.
- The 20 PPI Standard Sponge is designed for Aquael Hypermax external canister filters.
- The 30 PPI Blue Sponge is specified for the Aquael Hypermax 4500.
- The Mechanical Pre-Filter Sponge is compatible with Aquael Hypermax and Hypermax Link filters.
- The pre-filter sponge is installed in a different compartment from the standard filter media sponges.
- Each selected variation contains one sponge only.
- Always disconnect the filter from the power supply before maintenance.
- Clean using aquarium water rather than household cleaning products.
- Replace filter foam when significantly worn or damaged.
Whether you need coarse mechanical filtration, finer particle removal or replacement pre-filter media, Aquael Hypermax Filter Sponges provide practical options for maintaining your aquarium filtration system. With three selectable variations, you can choose the appropriate replacement for your filter and help maintain effective debris removal, water circulation and filtration performance.
Specifications:
- Product Type: Replacement aquarium filter sponge
- Available Variations: 20 PPI Standard / 30 PPI Blue / Mechanical Pre-Filter
- 20 PPI Filtration Type: Coarse mechanical and biological filtration
- 30 PPI Filtration Type: Finer mechanical and biological filtration
- Pre-Filter Filtration Type: Mechanical pre-filtration (MECH)
- 20 PPI Pore Density: 20 pores per inch
- 30 PPI Pore Density: 30 pores per inch
- Pre-Filter Pore Density: Not specified
- 20 PPI Compatibility: Aquael Hypermax external canister filters
- 30 PPI Compatibility: Aquael Hypermax 4500 external canister filter
- Pre-Filter Compatibility: Aquael Hypermax and Hypermax Link
- 20 PPI Installation: Filter media basket
- 30 PPI Installation: Filter media basket
- Pre-Filter Installation: Designated pre-filter chamber
- Material: Aquarium-safe filtration foam
- Maintenance: Rinse gently in aquarium water when required
- Quantity: 1 sponge per selected variation
- Contents: 1 x Aquael replacement filter sponge in the selected variation
| Brand | Aquael |
Aquacadabra acts as credit broker/intermediary and not as a lender.
Klarna's credit products are provided by Klarna Bank AB, which is authorised and regulated by the Swedish Financial Services Authority, with limited supervision by the Financial Conduct Authority. More information can be found here.
Newpay finance options are provided through Deko’s platform by NewDay. P.D. Aquatics Ltd, t/a Aquacadabra is an Introducer Appointed Representative of Pay4Later Ltd, t/a Deko, which is authorised and regulated by the Financial Conduct Authority (ref no 728646) and is a credit broker, not a lender. NewDay Ltd is authorised and regulated by the Financial Conduct Authority (ref no 690292) and is authorised by the Financial Conduct Authority under the Payment Services Regulations 2017 for the provision of payment services (ref no 555318). More information can be found by clicking the newpay option above, or in the Newpay FAQs.
We really want you to be happy with the product that you've received. If however, when the goods arrive they're not what you want, then no problem - we have a 60 day no quibble return guarantee. Just let us know that you're going to return the item(s) by contacting us(stating your Order Number) and complete the returns packing slip that will have been included with your delivery. This will help us to quickly identify the item that you have returned (unopened and unused) - and we'll put a refund through for you.