Aquacadabra Filter Foam Fits Oase Biotec 5.1 10.1 30.1 Fine Medium Coarse

Aquacadabra Filter Foam Sponges – Fits Oase BioTec 5.1, 10.1 & 30.1

Maintain effective pond filtration with Aquacadabra Compatible Filter Foam Sponges, designed to fit Oase BioTec 5.1, 10.1 and 30.1 pond filtration systems.

These high-quality replacement filter foams provide a cost-effective alternative to genuine Oase filter media, helping remove dirt, debris and organic waste while supporting beneficial biological filtration.

Available in Fine, Medium and Coarse grades, these replacement sponges help maintain effective mechanical filtration and water circulation within your existing pond filter.

Each sponge measures approximately 25 x 20 x 8cm, making them suitable for the specified Oase BioTec models.

IMPORTANT: These are Aquacadabra compatible aftermarket replacement foams and are NOT genuine Oase manufactured products.

Key Features:

• Fits Oase BioTec 5.1, 10.1 & 30.1 – Compatible replacement foam for selected pond filters
• Fine, Medium & Coarse Grades – Choose the appropriate filtration level
• Fine Foam – Helps capture smaller suspended particles
• Medium Foam – Traps medium-sized debris while maintaining water flow
• Coarse Foam – Captures larger dirt particles and organic waste
• Biological Filtration Support – Porous structure provides surface area for beneficial bacteria
• Reusable Media – Can be gently rinsed and reused while in suitable condition
• Cost-Effective Alternative – Replace worn foam without purchasing genuine branded media
• Multiple Pack Options – Choose from packs of 2, 3 or a mixed 9-piece set

Available Variations:

Fine Filter Foam

The Fine Filter Foam helps capture smaller dirt particles and suspended debris that pass through coarser filtration stages.

This supports improved pond water clarity and effective mechanical filtration.

Medium Filter Foam

The Medium Filter Foam provides balanced mechanical filtration, helping trap medium-sized particles while allowing water to circulate through the filter.

The porous structure also provides a suitable surface for beneficial bacteria to establish.

Coarse Filter Foam

The Coarse Filter Foam is designed to capture larger debris, fish waste and organic material.

Its open-pore construction supports water flow and provides an effective first stage of mechanical filtration.

3 x FMC Combination Pack

The 3 x FMC option contains a combination of all three foam grades:

• 3 x Fine Filter Sponges
• 3 x Medium Filter Sponges
• 3 x Coarse Filter Sponges

Total: 9 Replacement Filter Sponges.

Compatible Filter Models:

• Oase BioTec 5.1
• Oase BioTec 10.1
• Oase BioTec 30.1

NOT COMPATIBLE WITH OASE BIOTEC 5, 10 OR 30.

These earlier models require different sized replacement sponges. Please check your filter model before ordering.

Dimensions:

• Length: Approximately 25cm
• Width: Approximately 20cm
• Thickness: Approximately 8cm

Cleaning & Maintenance:

1. Disconnect the pond filtration equipment where required.
2. Remove the existing foam sponges from the filter.
3. Gently rinse reusable media in pond water to help preserve beneficial bacteria.
4. Replace foam that is damaged, worn or no longer suitable for use.
5. Install the replacement sponges in the correct filter positions.
6. Reassemble the filter and check that water is circulating correctly.

Avoid replacing all established biological filter media at the same time, as this can reduce beneficial bacterial populations.

Specifications:

• Brand: Aquacadabra
• Product: Compatible BioTec Filter Foam
• Compatible Brand: Oase
• Compatible Models: BioTec 5.1, 10.1 & 30.1
• Not Compatible With: BioTec 5, 10 & 30
• Product Type: Pond Filter Foam Sponge
• Available Grades: Fine, Medium & Coarse
• Approximate Dimensions: 25 x 20 x 8cm
• Available Quantities: 2, 3 or 9 Sponges
• Filtration: Mechanical & Biological Support
• Product Status: Compatible Aftermarket Replacement

Important Information:

PLEASE SELECT YOUR REQUIRED FOAM TYPE AND QUANTITY FROM THE DROP-DOWN MENU BEFORE ORDERING.

This listing contains exactly seven variations: 2 x Fine, 2 x Medium, 2 x Coarse, 3 x Fine, 3 x Medium, 3 x Coarse and 3 x FMC.

THESE ARE NOT GENUINE OASE FILTER SPONGES.

These are Aquacadabra compatible aftermarket replacement foams designed to fit the specified Oase BioTec models.

Colour Variation: Foam colours may vary depending on supplier availability. The filtration grade and intended function remain as described.

The complete pond filter, pump, housing and other accessories are not included.

Please check your existing filter model and sponge dimensions before purchasing.

Maintain effective pond filtration with Aquacadabra Compatible Filter Foam Sponges for Oase BioTec 5.1, 10.1 & 30.1, available in Fine, Medium, Coarse and mixed pack options.