NT Labs AxoSafe & AxoCure 100ml Axolotl Water Conditioner Parasite Treatment

NT Labs AxoSafe & AxoCure 100ml Bundle – Axolotl Water Conditioner & Parasite Treatment

Care for your axolotl with the NT Labs AxoSafe & AxoCure Bundle, combining two specialist products developed specifically for axolotl aquarium care.

This convenient bundle includes 1 x NT Labs AxoSafe 100ml and 1 x NT Labs AxoCure 100ml, providing a dedicated tap water conditioner alongside a treatment for specified external parasitic infections.

NT Labs AxoSafe helps make tap water safe for axolotls by removing harmful chlorine, chloramine, halogens and heavy metals. Its colourless formula is free from aloe vera, making it suitable for axolotl aquariums.

NT Labs AxoCure is a specialist treatment designed for external parasitic infections, including Monogenetic trematodes, Ichthyobodo and Chilodonella uncinata. It is administered in a separate treatment bath rather than directly into the aquarium.

PLEASE NOTE: This listing includes both products in 100ml bottles, providing 200ml in total.

Key Features:

• Complete Axolotl Care Bundle – Includes AxoSafe 100ml and AxoCure 100ml
• Specially Developed for Axolotls – Formulated for the requirements of axolotl care
• Removes Chlorine & Chloramine – AxoSafe conditions tap water for aquarium use
• Neutralises Heavy Metals – Helps remove potentially harmful substances from tap water
• Aloe Vera-Free Formula – AxoSafe is designed without aloe vera
• Supports Stress Reduction – Suitable for water changes and transportation
• External Parasite Treatment – AxoCure targets specified parasitic infections
• Separate Treatment Bath – AxoCure is administered outside the main aquarium
• Convenient 100ml Bottles – Two specialist products in one bundle

NT Labs AxoSafe 100ml – Axolotl Water Conditioner

NT Labs AxoSafe is a specialist water conditioner designed to make tap water suitable for axolotls.

Tap water can contain chlorine, chloramine, halogens and heavy metals that may be harmful to sensitive aquatic animals.

AxoSafe works immediately to remove chlorine and chloramines, helping prepare safer water for new aquarium setups, water changes and axolotl transportation.

Unlike some conventional aquarium water conditioners, AxoSafe is free from aloe vera, making it suitable for use where axolotls are present.

When to Use AxoSafe:

• When setting up a new axolotl aquarium
• During routine aquarium water changes
• When adding fresh tap water
• When preparing water for axolotl transportation
• When conditioning replacement aquarium water

AxoSafe Dosage & Instructions

Recommended Dosage: 10ml per 50 litres of aquarium water.

1. Calculate the volume of water being treated.
2. Shake the AxoSafe bottle thoroughly before use.
3. Measure the correct amount of conditioner.
4. Mix the required dose into the new water before adding it to the aquarium.
5. Add the conditioned water slowly to the aquarium.

AxoSafe works immediately to remove chlorine and chloramines from tap water.

AxoSafe Dosage Guide:

At the recommended dosage, one 100ml bottle of AxoSafe treats up to 500 litres of water.

NT Labs AxoCure 100ml – Axolotl External Parasite Treatment

NT Labs AxoCure is a specialist treatment developed to help treat specified external parasitic infections in axolotls.

External parasites can cause skin irritation, excessive mucus production and changes in normal axolotl behaviour.

AxoCure is designed to treat infections associated with:

• Monogenetic trematodes
• Ichthyobodo
• Chilodonella uncinata

IMPORTANT: AxoCure must be used in a separate treatment bath and must NOT be poured directly into the main aquarium.

Common Signs of External Parasitic Infection

Symptoms that may be associated with external parasitic infections include:

• Excessive mucus secretion
• Blisters, sores or skin lesions
• Loss of colour or patchy skin
• Peeling, shedding or chalky skin
• Scratching or rubbing against surfaces
• Unusual skin irritation

These symptoms can also be caused by poor water quality or other health conditions. Always test aquarium water before beginning treatment and seek specialist veterinary advice where appropriate.

AxoCure Treatment Instructions

Recommended Dosage: 5ml per litre of treatment bath water.

1. Test the aquarium water to check that symptoms are not caused by poor water quality.
2. Prepare a separate quarantine aquarium or appropriately sized clean treatment container.
3. Ensure the container has a suitable lid with ventilation holes.
4. Fill the container with aquarium water and accurately measure the volume.
5. Add AxoCure at a rate of 5ml per litre and mix thoroughly.
6. Carefully transfer the axolotl into the treatment bath using a fine net or suitable container.
7. Keep the treatment bath in a cool, dark location.
8. Leave the axolotl in the bath for no longer than 8 hours.
9. Check the axolotl hourly for signs of stress.
10. While treatment is taking place, perform a water change in the main aquarium.
11. After treatment, carefully return the axolotl to the aquarium, transferring as little bath water as possible.

IMPORTANT: Never leave an axolotl in the AxoCure treatment bath for more than 8 hours.

AxoCure Treatment Dosage Guide:

One 100ml bottle of AxoCure provides enough treatment for 20 litres of bath water at the stated dosage.

Important AxoCure Treatment Precautions

• DO NOT pour AxoCure directly into the main aquarium.
• DO NOT leave the axolotl in the treatment bath for longer than 8 hours.
• DO NOT use for more than two consecutive days.
• Always monitor the axolotl hourly during treatment.
• Keep the treatment bath in a cool, dark location.
• Ensure the treatment container has adequate ventilation.
• Follow the manufacturer's current instructions carefully.

If symptoms persist after two weeks, the manufacturer advises that treatment may be repeated for two consecutive days using the recommended procedure. Seek veterinary advice if symptoms persist or worsen.

Why Choose This Bundle?

The NT Labs AxoSafe & AxoCure Bundle combines two useful products for different aspects of axolotl care.

AxoSafe provides everyday water conditioning by removing harmful substances from tap water.

AxoCure provides a targeted treatment option for specified external parasitic infections when administered correctly in a separate treatment bath.

Together, they provide a convenient combination for axolotl keepers looking to maintain suitable aquarium water conditions and have access to specialist parasite treatment.

Specifications:

• Brand: NT Labs
• Product 1: AxoSafe
• Product 2: AxoCure
• Product Type: Axolotl Water Conditioner & External Parasite Treatment Bundle
• AxoSafe Volume: 100ml
• AxoCure Volume: 100ml
• Total Liquid Volume: 200ml
• AxoSafe Dosage: 10ml per 50 Litres
• AxoCure Dosage: 5ml per Litre of Treatment Bath Water
• AxoCure Maximum Bath Duration: 8 Hours
• Suitable Animal: Axolotls
• Quantity: 2 Bottles

Pack Contents:

• 1 x NT Labs AxoSafe 100ml
• 1 x NT Labs AxoCure 100ml

Total: 2 x 100ml Bottles (200ml Combined)

Important Information:

PLEASE NOTE: THIS LISTING IS FOR ONE NT LABS AXOSAFE 100ML AND ONE NT LABS AXOCURE 100ML.

AxoSafe is intended for conditioning aquarium tap water, while AxoCure is a specialist treatment for specified external parasitic infections.

AXOCURE MUST ONLY BE ADMINISTERED IN A SEPARATE TREATMENT BATH ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

Do not add AxoCure directly to the main aquarium or exceed the recommended treatment duration.

Always check aquarium water quality before treating suspected disease symptoms.

Use a suitable aquarium test kit to monitor ammonia, nitrite, nitrate and pH.

Keep all treatments out of reach of children and pets.

Always read the current product label and manufacturer's instructions before use.

Support your axolotl's care with the NT Labs AxoSafe & AxoCure 100ml Bundle, combining everyday tap water conditioning with a specialist external parasite treatment.